top of page

ELITE SERIES / OVEN CURE

OUR HIGHEST PERFORMING THIN FILM COATING

OVEN CURE / AVAILABLE IN 9 PLUS COLORS

Common Uses: tight tolerance parts, fasteners, valves, marine, energy, offshore and more.

KEY FEATURES

  • Increased Abrasion, Corrosion, Wear, Impact, Scratch, Chemical Resistance and Thermal Stability.

  • Maximum Hardness, Durability, Flexibility and Adhesion

  • Excellent Spray ability, Coverage and Consistency

  • Lowest Coefficient of Friction, Rivaling Teflon.

TECHNICAL & PERFORMANCE DATA

  • Theoretical Solids by Weight ………………………….......................... 30 – 60%

  • Theoretical Coverage per Gallon at 1.0 mil ………...................... 480 – 960 ft2

  • Viscosity (Brookfield Viscometer) ……………………...................... 60 – 120 cP

  • Recommended Film Thickness …………………………...................... 1.0 mil

  • Adhesion Cross-Cut Tape (ASTM D3359) ……………............... 5B

  • Impact (ASTM 2794) ………………………………………....................... 160/160 inch/lbs.

  • Mandrel Bend (ASTM D522) ……………………………..................... 0mm loss @ 180° Rotation

  • Liquid Density (g/mL) ………………………………………........................ 1.36 – 1.45

  • ASTM D3363 Exceeds 9h scratch and gouge hardness

  • ASTM D4060 Taber abrasion greater than 8000 wear cycles per mil

  • ASTM B117 Corrosion resistance more than 3000 hours

  • ASTM D522 0mm coating loss at 180o mandrel bend

  • Coefficient of Friction (Steady State Dynamic CoF Under Load) Equaling Teflon at 0.11

ALL CERAKOTE COATINGS ARE VOC COMPLIANT UNDER THE EPA AND HAVE LOW TO NO VOC CONTENT. 

bottom of page